Digital LCD Automatic Multi Air Conditioner Room Heating Temperature Controller
Features:
Our AC controller is Microprocessor-based fully programmable and User friendly. It can be operated by Time base or temperature base (User settable by keys). Up to 6 nos. of AC can be controlled by using this controller (User settable by keys). AC can be protected from unhealthy conditions (i.e. Phase fault, over-voltage, low voltage, overload, and spike or surge voltage). All set points programmable from keypad or remote. All settings of the AC Controller are Password protected. 20 char X 4 lines LCD display with backlight, on controller front panel. Actual AC voltage, Room temperatures are shown in Display. Automatic timer mode operation if room-temperature sensor fails. It has protected from Phase sequence fault. Set time & run time remember capable.
SKU:
NSB_Heating _Temperature_Controller
Supply Voltage: 230 VAC ± 15 % for Single Phase
Temperature Sensing Range: -40 °C to 140.0 °C
Power On Delay Time: 1 minute.
Restart Delay Time: 1 minute.
Over-Voltage: Default 260V. User settable by Keys Or Remote.
Under Voltage: Default 180V. User is settable by keys Or Remote.
Cycle Time: 255min. User is settable by keys Or Remote.
A number of AC Setup 1-6. User is settable by keys Or Remote.
High-Temperature Setup 0-140. User is settable by keys Or Remote.
Low-Temperature Setup 0-140. User is settable by keys Or Remote.
Sensing:
Inbuilt voltage & current sensing in power supply, temperature sensing and fire input sensing.
Front Panel:
20 Char X 4 lines LCD display with backlit.
3 Key Button for programming.
Remote:
LCD Display: Delay, time, temperature, Run A/C number, input voltage, high voltage, low voltage, overload & surge/spike.
Protection:
Thunder protection, surge protection, spike protection, high voltage protection, low voltage protection, overload protection, Phase sequence Fault protection.
Main Images:
Block Diagrams:
Our AC controller can be operating as time & temperature based. Time & Temperature can be set by the user.
Digital LCD Automatic Multi Air Conditioner Room Heating Temperature Controller
Optional Features: If need optional feature will be charged add.
Alarm System:
Our AC controller has alarm system. If temperature exceed higher level, alarm system will be ON and communicated to Huawei system using dry contract.
DC Voltage System (DVS):
Our AC controller has dual power Our system. Failure of main line AC voltage or during load sheading time our AC controller will be run from DC 48volt system.
DC Fan System:
Failure of mainline AC voltage or during load sheading time temperature will be increased. If temperature exceed higher level, DC Fan will be ON and communicated to Huawei system using dry contract.
SCADA System:
Our AC controller can be operated by SCADA system. Using SCADA software user can control AC controller and store room temperature data in a server. It’s communication can be GSM or LAN Based.
Terms & Conditions:
- Advance Payment.
- Quotation valid only for 15 days
Please contact us in case of any questions.
Thanking You,
